Method v1.0

Travel-router protocol

Setup, VPN-client compatibility, and behavior on typical travel networks.

Published 2026-11-17 · All protocols

Steps

  1. Log the exact model, firmware version, date, and the network the WAN side used (hotel, airport, phone tethering, or a lab access point that stands in for those).
  2. Time and note the first-run setup: account requirement, default Wi-Fi credentials, and whether a firmware update is forced.
  3. Configure a WireGuard client with a documented profile. Log whether the handshake succeeds and whether LAN clients exit through the tunnel.
  4. Repeat with OpenVPN if the vendor documents support for it.
  5. Run the leak-test tool from a client on the LAN, on and off the tunnel.
  6. Note features the vendor documents (repeater, USB tethering, AdGuard Home, and similar) and whether they were in scope for that log.

Limits

  • Throughput and range figures will only appear if we measured them, with the method and hardware described in the log.

When a log exists for this protocol, it will be listed on raw data and linked from the relevant guide.